Spell Hollow Cosmetic Boxes For Perfume Octave offset trademark edition need to consider some issues

Spell Hollow Cosmetic Boxes For Perfume Octave offset trademark edition need to consider some issues

 

The packaging or trademarks of wine, medicine, food, beverage, daily necessities and other products printed by octavo offset press have the characteristics of low cost, simple operation, stable quality, convenient and fast, and have been widely used by small and medium-sized printing enterprises.

 

The following talk about the actual work of the plate should consider some issues.

 

1. The design of commodity packaging or trademark is mostly made by computer, after the output of color film for printing, and then on the machine printing. Whether it is manual plate, or electric plate, we should consider the printing process, such as cutting, embossing, hot stamping, laminating and so on will be affected by the previous process.

 

2. Wine labels or food and beverage packaging, are usually internal and external packaging integration. The label pasted on the wine bottle is mainly composed of two parts: cap label and body label. Cap mark shape is irregular, and the pattern is complex, most of them should be die-cut. When assembling the cap mark and the body mark should be separated, the cap mark can not be close to the body mark, and the space between the cap mark should also be set aside for die cutting and indentation.

 

3. Note the size of the finished product. After the brand into a large version of the octagon, four weeks to set aside about 3mm of wool bleeding room, otherwise, cutting and die cutting will affect the quality of the product because of the white edge.

 

4. If there is a field or flat net above and below the trademark, the field or flat net should be put together when making the plate. For example, there is a field under the wine label. When making the plate, the field and the field corner should be put together diagonally. In this way, the upper and lower two labels can be cut with one knife, and there will be no white edge problem.

 

5. When assembling, we should consider the problem of opening paper and cutting material, and how to determine the mouth. For small size octagon paper (39cm × 27cm) and large size Octagon paper (30cm×42cm), if the spelled out is full plate and full edge, and there is 1.5cm in the finished size of one side of the trademark without any text, the white edge can be used as the printing position.

 

6. Hand collage is usually carried out on collage coordinates copied from transparent film. When assembling, the size of the finished product should be accurate, and the place should be correct, without skew. For small trademarks, a large number of them are placed during the making of plates. In order to prevent size confusion in the middle of the making of plates, the precise positions of fine lines, text and patterns in the vertical and horizontal directions of the trademarks should be marked with the help of transparent making coordinates. [next]

 

7. When assembling plates, it is required to mark the position of regular line, cross line, center line, drag line, corner line, color block, mouth mouth, etc., and all kinds of lines should not be in the size of the finished product of the trademark, otherwise, the dirty line and color block that cannot be cut off will affect the appearance of the finished product of the trademark. If the line or color block is too long available knife scraping short; The version of the available repair paste in the PS version to be corrected.

 

8. If the film is 16 open, 32 open, 64 open and other small specifications, it needs to be connected to the plate stitching, because the film has a certain thickness, the film folds each other, easy to produce a gap in the fold when the PS plate or copy the film, so that the vacuum pump can not close, resulting in the printing plate out of the plate, dot deficiency, no ink and other faults.

Solution: one is in the computer output octavo version; The second is to cut the plate according to the actual situation, with a knife to thin the edge of the film to avoid folding.

 

9. Most of the trademarks or packaging products are multi-color overprints. Only when the printing is accurate, can accurate overprints be achieved. The printing order is:

(1) first base color, then press color;

 

(2) Spell the light color first, then spell the dark color;

 

(3) the text, lines and patterns printed out by the dot are of high precision, and the first spell is used;

 

(4) Spell the main color first, then spell the secondary color;

 

The most effective way to test the quality of the Mosaic is proofing, spelling out the version before printing, it is best to offset proofing, check whether the overprint is accurate, whether the ink hue is consistent with the color of the design manuscript, graphic lines are omitted, and at the same time also check the monochrome, overlapping color C, M, Y, K values, for customers to provide accurate proofreading text, color. The actual basis of the pattern.